Rabu, 27 Mei 2015
The Purpose Of The Writing :
- To know what is the meaning of Interfaces
- To know what is the meaning of VLAN
- To know how to switch the Router Port to Switch
Basic Concepts :
VLAN is network model that is not limited to a physical location such as a LAN, this has resulted in a network can be configured Virtual without having to comply with the physical location of equipment. The use of VLAN will make the network setting to be very flexible which can be made segments that depend on the organization or department, without depending on the location of the workstation.
Configuration :
-CHANGE THE INTERFACE NAME
1. First see the name of interfaces by sintaks interface pr.
2. Now change the name with public and local, with the sintaks interface set name=public&local.
3. After change it will displayed the number, ethernet 1 is place 0, and ethernet 2 is place 1.
4. Now, this configuration is how to change interfaces with GUI, first go to interfaces then find the
interfaces would you want to change the name, click apply > OK.
interfaces would you want to change the name, click apply > OK.
- TURN ON AND TURN OFF THE INTERFACE
Turn Off
1. Now, i will turn off the ether3,4,5. To make it off, insert the sintaks interface disable 0,1,2. Then
see the X icon beside the ether, that mean the ether was Off. if you want to make On again, you
just insert the sintaks enable 0,1,2.
see the X icon beside the ether, that mean the ether was Off. if you want to make On again, you
just insert the sintaks enable 0,1,2.
2. Next we must give the comment to the interface, it make easy to see how different who is the local
connection and public connection.
To give comment, use the sintaks interface set name=ether1 comment="ini ke internet"
number=4 and the same step for ether2.
connection and public connection.
To give comment, use the sintaks interface set name=ether1 comment="ini ke internet"
number=4 and the same step for ether2.
3. After you setting, the comment will show up after you see the interface.
- ADD VLAN AND REMOVE VLAN
1. To add VLAN you just insert the sintaks :
interface vlan add name=vlan1 interface=ether2 vlan-id=100
interface vlan add name=vlan2 interface=ether2 vlan-id=200
i add the VLAN into ether2, you can add the VLAN to the other ether.
interface vlan add name=vlan1 interface=ether2 vlan-id=100
interface vlan add name=vlan2 interface=ether2 vlan-id=200
i add the VLAN into ether2, you can add the VLAN to the other ether.
2. If you see in the interface, the vlan1 and vlan2 will be displayed.
3. This is the VLAN after you add in CLI.
4. Now remove again the VLAN with the sintaks :
interface vlan remove vlan1
interface vlan remove vlan2
interface vlan remove vlan1
interface vlan remove vlan2
- CHANGE THE RB INTO SWITCH
1. First check the Unuseable Port and choose the Unuseable port to change into Switch.
2. Now i want change ether3, ether4, ether 5, into the Port place. insert the sintaks like the under step.
3. After you you change the ether3-5, the Port None will change into ether 2.
THANK YOU ^.^
